ELECTRIC VEHICLE

Every year a new race car comes to life representing all the hard work of a dedicated team. A race car is the perfect platform for complex and interdisciplinary engineering. Each car stand out with unique characteristics and features, all developed by engineering students at NTNU. After a car has raced at the Formula Student competitions, it is used for testing, drivers training and on numerous promotions and events. Even though Revolve NTNU has a history of taking big steps every year, there is a clear knowledge and experience transfer from one team to the next. The cars represent our legacy and we will continue our steep learning curve to design the best engineered car in the field.



2014
2015
2016
2017
2018
2014

KOG Arctos R

KOG Arctos R is the the third car developed by Revolve NTNU, and also Norway’s first electric race car. The car features an fully electric drivetrain and a carbon fiber monocoque, resulting in a weight loss of 65 kg compared to its predecessor KA Aquilo R. KOG Arctos R was designed from the bottom up, with an overall focus on reducing weight and at the same time introducing more power through the electric motor. The car has an extensive aerodynamics package creating a massive 140 kg of downforce at 80 km/h. The battery package for the car was designed in-house, delivering 7,6 kWh of energy and weighing in at 46 kg. Other innovations include a self-designed motor control unit, carbon fiber rims and driveshaft and titanium laser sintered uprights.












2015

Vilje

Vilje is the second electric car by Revolve NTNU, and is a complete redesign from the KOG Arctos R. Even after the extensive weight reduction last year, the weight of Vilje was reduced by another 10 kg to just 175 kg. The drivetrain is based on the Emrax 228 electric motor with an in-house developed inverter and accumulator. All electronics were developed in-house, including the battery management system, motor control and inertia measurement unit. The aerodynamics package went through a complete redesign and features an undertray and rear diffusers in addition to the front and rear wings. A two-piece monocoque design was made for the chassis and a hydrophobic nano technology paint job weighing just 260 grams was applied. For 2015 our telemetry software Revolve Analyze was completely reworked from the ground up to enable more efficient and systematic testing and driver feedback.








2016

Gnist

Gnist is the first four-wheel drive electric car designed and manufactured in Scandinavia. Four hub-mounted AMK DD5-14-10 motors with individual compound planetary gearboxes provide a combined power output of 190 bhp. A total redesign from Vilje was necessary to accommodate this powertrain system. A new monocoque design, aerodynamics package, electrical systems, and more make way for an advanced torque vectoring system: By controlling the power output for each wheel individually, Gnist’s cornering and acceleration capabilities are further improved.

Gnist’s drivetrain and powertrain design was acknowledged with two special awards:
– Jaguar Land Rover Award For Innovation in Propulsion Systems.
– Class 1 Best High Voltage Powertrain Implementation by Mercedes AMG High Performance Powertrains.

Other improvements include two-piece full carbon fiber rims, topology optimized titanium 3D-printed uprights, and a pushrod actuated, double un-even a-arm, suspension system.








2017

Eld

Eld is our second four-wheel drive electric race car. The car is based on many of the same features as our previous race car, Gnist, but designed to be even better than its predecessor. By focusing on reducing weight, we managed to shave off 7 kg. We used the same mould for our monocoque, but the aero package was revamped, resulting in a downforce of 610N at 60 km/h. Both the monocoque and the aero package are made of carbon fiber and produced in-house. We also changed the upright design to get an even stiffer and lighter upright for maximum performance. Eld consists of 66 in-house designed and produced circuit boards and 325 sensors. Our program Revolve Analyze is used to receive and use data from the sensors. Revolve Analyze is an in-house data solution for visualizing and interpreting sensor data through telemetry from the car. Furthermore, we made significant changes to our torque vectoring system to help the car stick to the track during dynamic events.







2018




Atmos

Atmos is the third generation four-wheel driven, electrical race car developed, and produced by Revolve NTNU. A new monocoque design with a rearwards inclination in the floor has opened for an aerodynamic undertray and diffuser, achieving a 30% increase in downforce. To compensate for an increase in downforce, the suspension is fitted with a 3rd spring, to stabilize the chassis in heave/pitch movement.

In addition to the 325 sensors used in last years vehicle, Atmos is equipped with hub-mounted accelerometers, IR temperature sensors and a new inertial navigation system. One of the focus areas of the year have been to provide more information about the vehicle and information of higher quality. It is used in the advanced torque vectoring algorithm, and to validate the performance of Atmos. We have also upgraded our telemetry to include driver communication, and live transmission of HD-video. This is used as a visual aid for driver-training.